|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
New Product DG2037/2038/2039 Vishay Siliconix Low-Voltage, Low rON, Dual SPST Analog Switch DESCRIPTION The DG2037/2038/2039 are dual single-pole/single-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low power, fast switching, low on-resistance (rDS(on): 3.0 at 2.7 V) and small physical size, the DG2037/2038/2039 are ideal for portable and battery powered applications requiring high performance and efficient use of board space. The DG2037/2038/2039 are built on Vishay Siliconix's new high density low voltage process. An epitaxial layer prevents latchup. Each switch conducts equally well in both directions when on, and blocks up to the power supply level when off. FEATURES * * * * * * * Low Voltage Operation (1.8 V to 5.5 V) Low On-Resistance - rDS(on): 3.0 Fast Switching - 12 ns Low Charge Injection - QINJ: 10 pC Low Power Consumption TTL/CMOS Compatible SOT23-8 and MSOP-8 Packages BENEFITS * * * * Reduced Power Consumption Simple Logic Interface High Accuracy Reduce Board Space APPLICATIONS * * * * * Cellular Phones Communication Systems Portable Test Equipment Battery Operated Systems Sample and Hold Circuits FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION - DG2037 DG2037, MSOP-8 NO1 COM1 IN2 GND 1 2 3 4 Top View Device Marking: 2037 8 7 6 5 V+ IN1 COM2 NO2 IN1 V+ NO2 COM2 1 2 3 4 DG2037. SOT23-8 8 7 6 5 Top View Device Marking: E0 NO1 COM1 IN2 GND TRUTH TABLE - DG2037 Logic 0 1 Switch Off On Document Number: 72359 S-71035-Rev. B, 21-May-07 www.vishay.com 1 New Product DG2037/2038/2039 Vishay Siliconix FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION - DG2038/DG2039 DG2038, MSOP-8 NC1 COM1 IN2 GND 1 2 3 4 8 7 6 5 V+ IN1 COM2 NC2 IN1 V+ NC2 COM2 1 2 3 4 DG2038. SOT23-8 8 7 6 5 NC1 COM1 IN2 GND Top View Device Marking: 2038 Top View Device Marking: F1 TRUTH TABLE - DG2038 Logic 0 1 Switch On Off DG2039, MSOP-8 NC 1 COM1 IN2 GND 1 2 3 4 Top View Device Marking: 2039 8 7 6 5 V+ IN1 COM2 NO2 IN1 V+ NO2 COM2 1 2 3 4 DG2039. SOT23-8 8 7 6 5 Top View Device Marking: F2 NC 1 COM1 IN2 GND TRUTH TABLE - DG2039 Logic 0 1 Switch-1 On Off Switch-2 Off On ORDERING INFORMATION Temp Range Package MSOP-8 - 40 to 85 C SOT23-8 Part Number DG2037DQ DG2038DQ DG2039DQ DG2037DS DG2038DS DG2039DS www.vishay.com 2 Document Number: 72359 S-71035-Rev. B, 21-May-07 New Product DG2037/2038/2039 Vishay Siliconix ABSOLUTE MAXIMUM RATINGS Parameter Referenced V+ to GND IN, COM, NC, NOa Continuous Current (Any Terminal) Peak Current (Pulsed at 1 ms, 10 % duty cycle) Storage Temperature (D Suffix) Power Dissipation (Packages)b MSOP-8c SOT23-8c Limit - 0.3 to 6.0 - 0.3 to (V+ + 0.3) 50 200 - 65 to 150 320 515 Unit V mA C mW Notes: a. Signals on NC, NO, or COM or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC Board. c. Derate 6.5 mW/C above 25 C. SPECIFICATIONS (V+ = 3.0 V) Test Conditions Otherwise Unless Specified V+ = 3 V, 10 %, VIN = 0.4 or 1.5 Ve Limits - 40 to 85 C Tempa Minb Typc Maxb Unit Parameter Analog Switch Analog Signal Ranged On-Resistance rON Flatnessd rON Matchd Symbol VNO, VNC VCOM rON rON Flatness rON Match INO(off) INC(off) ICOM(off) Full V+ = 2.7 V, VCOM = 1.5 V, INO, INC = 10 mA V+ = 2.7 V, VCOM = 1.5 to V+, INO, INC = 10 mA V+ = 2.7 V, VD = 1.5 to V+, ID = 10 mA V+ = 3.3 V VNO, VNC = 1 V/3 V, VCOM = 3 V/1 V V+ = 3.3 V, VNO, VNC = VCOM = 1 V/3 V Room Full Room Room Room Full Room Full Room Full Full Full f = 1 MHz VIN = 0 or V+ Full Full Room Full Room Full Room Room Room Room VIN = 0 or V+, f = 1 MHz Room Room 0 3 0.5 0.3 -1 - 10 -1 - 10 -1 - 10 1.5 V+ 6 7 V Switch Off Leakage Current 1 10 1 10 1 10 nA Channel-On Leakage Current Digital Control Input High Voltage Input Low Voltage Input Capacitanced Input Current Dynamic Characteristics Turn-On Time Turn-Off Time Charge Injectiond Off-Isolation Crosstalkd Source-Off Capacitanced Drain-Off Capacitance Power Supply Power Supply Range Power Supply Current Power Consumption d d d ICOM(on) VINH VINL Cin IINL or IINH tON tOFF QINJ OIRR XTALK CNC/NO(off) CCOM(off) CON V+ I+ PC 0.4 8 -1 22 17 1 - 61 - 67 17 19 35 2.7 3.3 0.02 1.0 3.3 1 35 40 31 35 V pF A VNO or VNC = 2.0 V, RL = 300 , CL = 35 pF Figures 1 and 2 CL = 1 nF, VGEN = 0 V, RGEN = 0 , Figure 3 RL = 50 , CL = 5 pF, f = 1 MHz ns pC dB pF Channel-On Capacitance V A W VIN = 0 or V+ Document Number: 72359 S-71035-Rev. B, 21-May-07 www.vishay.com 3 New Product DG2037/2038/2039 Vishay Siliconix SPECIFICATIONS (V+ = 5.0 V) Test Conditions Otherwise Unless Specified V+ = 5 V, 10 %, VIN = 0.8 or 2.4 Ve Limits - 40 to 85 C Tempa Minb Typc Maxb Unit Parameter Analog Switch Analog Signal Ranged On-Resistance rON Flatnessd rON Matchd Symbol VNO, VNC VCOM rON rON Flatness rON Match INO(off) INC(off) ICOM(off) Full V+ = 4.5 V, VCOM = 2.5 V, INO, INC = 10 mA V+ = 4.5 V, VCOM = 2.5 to V+, INO, INC = 10 mA V+ = 4.5 V, ID = 10 mA, VCOM = 2.5 V V+ = 5.5 V VNO, VNC = 1 V/4.5 V, VCOM = 4.5 V/1 V V+ = 5.5 V VNO, VNC = VCOM = 1 V/4.5 V Room Full Room Room Room Full Room Full Room Full Full Full f = 1 MHz VIN = 0 or V+ Full Full Room Full Room Full Room Room Room Room VIN = 0 or V+, f = 1 MHz Room Room 0 2.5 1.6 0.4 0.2 -1 - 10 -1 - 10 -1 - 10 2.4 V+ 5 6 V Switch Off Leakage Current 1 10 1 10 1 10 nA Channel-On Leakage Current Digital Control Input High Voltage Input Low Voltage Input Capacitance Input Current Dynamic Characteristics Turn-On Timed Turn-Off Timed Charge Injectiond Off-Isolationd Crosstalkd Source-Off Capacitanced Drain-Off Capacitanced Channel-On Capacitanced Power Supply Power Supply Range Power Supply Current Power Consumption ICOM(on) VINH VINL Cin IINL or IINH 0.8 8 -1 19 12 1 - 61 - 67 15 17 35 4.5 5.5 0.02 1.0 5.5 1 30 35 22 30 V pF A tON tOFF QINJ OIRR XTALK CNC/NO(off) CCOM(off) CON V+ I+ PC VNO or VNC = 3 V, RL = 300 , CL = 35 pF Figures 1 and 2 CL = 1 nF, VGEN = 0 V, RGEN = 0 , Figure 3 RL = 50 , CL = 5 pF, f = 1 MHz ns pC dB pF V A W VIN = 0 or V+ Notes: a. Room = 25 C, Full = as determined by the operating suffix. b. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. c. Typical values are for design aid only, not guaranteed nor subject to production testing. d. Guarantee by design, nor subjected to production test. e. VIN = input voltage to perform proper function. f. Not production tested. Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. www.vishay.com 4 Document Number: 72359 S-71035-Rev. B, 21-May-07 New Product DG2037/2038/2039 Vishay Siliconix TYPICAL CHARACTERISTICS 25 C, unless otherwise noted 8 7 r ON - On-Resistance () r ON - On-Resistance () V+ = 1.8 V 6 5 4 3 2 1 0 0 1 2 3 4 5 V+ = 5.5 V V+ = 2.7 V V+ = 3.3 V 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 1 2 3 4 5 6 VCOM - Analog Voltage (V) V+ = 2.7 V 85 C 25 C - 4 0 C V+ = 5.5 V 85 C 25 C - 40 C VCOM - Analog Voltage (V) rON vs. VCOM Supply Voltage 10000 V+ = 5 V VIN = 0 V I+ - Supply Current (nA) I+ - Supply Current (A) 1000 rON vs. Analog Voltage and Temperature 100 mA 10 mA 1 mA 100 A 10 A 1 A 100 nA V+ = 5 V 100 10 1 - 40 10 nA - 20 0 20 40 60 80 100 10 100 1K 10 K 100 K 1M 10 M Temperature (C) Input Switching Frequency (Hz) Supply Current vs. Temperature 1000 V+ = 5.5 V Leakage Current (pA) Leakage Current (pA) 150 Supply Current vs. Input Switching Frequency V+ = 3.3 V T = 25 C 100 INC(off) 50 ICOM(on) 100 ICOM(off) ICOM(on) 10 INO(off) 0 ICOM(off) - 50 - 100 1 - 50 - 25 0 25 50 75 100 - 150 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Temperature (C) VCOM - Analog Voltage Leakage Current vs. Temperature Leakage vs. Analog Voltage Document Number: 72359 S-71035-Rev. B, 21-May-07 www.vishay.com 5 New Product DG2037/2038/2039 Vishay Siliconix TYPICAL CHARACTERISTICS 25 C, unless otherwise noted 30 t OFF - Switching Time (ns) 10 LOSS Loss, OIRR, XTALK (dB) - 10 25 tON, V+ = 3.3 V 20 tON, V+ = 5.5 V 15 tOFF, V+ = 3.3 V tOFF, V+ = 5.5 V 10 - 30 RL = 50 v+ = 5 v v+ = 3 v - 50 OIRR t ON, 5 - 70 XTALK, V+ = 3.3 V XTALK, V+ = 5.5 V 0 - 60 - 40 - 20 0 20 40 60 80 100 120 140 - 110 100 1K 10 K Frequency (Hz) 100 K 1M Temperature (C) Switching Time vs. Temperature and Supply Voltage 2.0 1.8 V T - Switching Threshold (V) 1.6 Q - Charge Injection (pC) 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 1 2 3 4 5 6 V+ - Supply Voltage (V) 12 10 8 Insertion Loss, Off-Isolation Crosstalk vs. Frequency Q at Source V+ = 3 V V+ = 5.5 V 6 4 2 0 -2 -4 -6 0 1 2 3 4 5 6 VCOM - Analog Voltage (v) V+ = 1.8 V Switching Threshold vs. Supply Voltage Charge Injection vs. Analog Voltage www.vishay.com 6 Document Number: 72359 S-71035-Rev. B, 21-May-07 New Product DG2037/2038/2039 Vishay Siliconix TEST CIRCUITS V+ Logic Input V+ Switch Input NO or NC IN Logic Input GND RL 300 CL 35 pF COM Switch Output VOUT 0.9 x VOUT Switch Output 0V tON tOFF VINH 50 % VINL tr < 5 ns tf < 5 ns CL (includes fixture and stray capacitance) VOUT = VCOM RL R L + R ON Logic "1" = Switch On Logic input waveforms inverted for switches that have the opposite logic sense. Figure 1. Switching Time V+ Rgen + Vgen V+ COM IN GND NC or NO VOUT VOUT CL = 1 nF IN On VOUT Off Q = VOUT x CL On VIN = 0 - V+ IN depends on switch configuration: input polarity determined by sense of switch. Figure 2. Charge Injection V+ 10 nF 10 nF V+ NC or NO IN COM IN 0 V, 2.4 V RL GND GND V COM Off Isolation = 20 log V NO/ NC NC or NO 0 V, 2.4 V V+ COM Meter HP4192A Impedance Analyzer or Equivalent f = 1 MHz V+ Analyzer Figure 3. Off-Isolation Figure 4. Channel Off/On Capacitance Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see http://www.vishay.com/ppg?72359. Document Number: 72359 S-71035-Rev. B, 21-May-07 www.vishay.com 7 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of DG203708 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |